
22
May10 Strategies To Build Your Saab 9-3 Key Replacement Empire
how to open a saab 93 without a key to Replace the Replacement Key Battery For the saab replacement key 9-3
saab 900 key owners have a unique set of steps to add another key. This requires an electronic handheld computer, referred to as Tech-2 that is operated by the dealer. Then a new car key and transponder have to be purchased and then programmed into the car.
Rotate your keys to prevent one from deteriorating faster than the next. This will also help to keep your keys in top shape.
Replacement Case
Contrary to the classic Saab keys of the past, the new key fobs have electronics inside which makes it difficult to create a duplicate. This has made stealing cars considerably more difficult than it was a few years ago. But, it has also made the replacement of lost keys a comparatively expensive endeavor.
Saab 9-3 owners should have two keys that work. It's expensive to replace a lost key because it requires replacing the CIM module, and reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.
There are ways to avoid these costs. Some parts providers will use the code of an extra key to cut a new metal blade for less than the price of the dealer. The key must be the exact same as the original for it to work in your vehicle.
You can also replace the case yourself by following these steps. You'll require an open-faced screwdriver and a lot of patience. With the screwdriver slowly tear the plastic away and separate the emergency key from the case. Once the case is open, remove the electronic components and put them back into your new case. Make sure you insert the correct key and badge back into the case as well.
Replacement Battery
The Saab 9-3 replacement battery is a cheap part that can be quickly and easily replaced. This YouTube DIY video Cyclone Cyd, a user on YouTube, explains how to replace the battery of the remote key fob in only four steps. This tutorial should work for any modern saab key fob, though the process may vary slightly.
The first step is to find the button that lets off the backup key on the fob. This is usually located near the Saab logo on the back of the fob. Then, use a flathead screwdriver into the small hole of this button. This should be enough to open the fob case in order to change the battery.
After the new battery CR1632 is in place then you can reassemble your remote key fob and then program it to your car. The entire process should not take more than an hour at most. It's a simple process that doesn't require any special tools.
The process is a bit more complicated if you lose your key, but still possible. The dealer will first need to read the VIN of the vehicle, and then purchase an alternative TWICE module, as well as a key blade that has the correct unique code. After that, they'll have to cut the new key and then program it using a new software tool called MDI.
Key Replacement Fob
The key fob is equipped with batteries that are used to lock and unlock your car. Batteries have a finite lifespan and will eventually die. This is a regular issue that occurs with all vehicles, and the good news is that you can change the batteries in a majority of key fobs without having to replace the whole case. You can purchase fobs replacements on Amazon that have all the electronics already installed, which means you can just pop open the case and replace those batteries that are old. You'll need to take out the emergency key before you can replace the batteries. To do this, you need to insert the screwdriver of a small flat head into the slot that is in the middle of the. The case will split as you work the screwdriver all around it.
If you're ready to change your keys, be sure to have an extra set on hand. This will save you a significant amount of money. If you have an additional key, ask the dealer to cut the key and program it for your vehicle. This is less expensive than purchasing a brand new key fob.
It is possible to add another key to your car in the event that you don't have one, however it requires an extensive amount of research and effort. The cost of adding a second key is a few hundred dollars, and also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.
Replacement Ignition
The modern SAAB 9-3 has an alarm system that is more sophisticated built on a keycode. This means that in the event that you lose your only working key, acquiring an additional one could be extremely expensive as the car has to have a specific computer module fitted and also needs to be specifically programmed to accept an additional key. The majority of locksmiths aren't able to do this or even dealers will charge hundred dollars to program the new key!
If you've lost your only working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to make the replacement, and will charge a premium for it. We can reprogram the existing EEPROM of your car's computer to be prepared for a new key. This will save you more than 50% off the cost you would spend at a dealer.
If you've owned a car like the SAAB 9-3 for quite a while, you know that the ignition keys are not very durable. If the ignition key you have isn't working correctly, you should think about replacing it. They can become very sticky and the buttons are known to fall off. Fortunately, replacing the ignition key isn't as complicated as it sounds, and it can be done quickly using the appropriate tools.
Reviews