Skip to main content

Blog entry by Rubin Cheshire

Ten Easy Steps To Launch Your Own Dual Fuel Range Cooker With 13amp Plug Business

Ten Easy Steps To Launch Your Own Dual Fuel Range Cooker With 13amp Plug Business

dual fuel mini range cooker Fuel Range Cooker With 13amp Plug

beko-90cm-dual-fuel-range-cooker-stainless-steel-2514-small.jpgAre you a home cook who appreciates the nimble cooking control of gas cooktops, but requires an electric oven for baking? Find a dual fuel cooker that gives you the best dual fuel range cookers uk of both worlds.

concert-90cm-dual-fuel-range-cooker-black-2629-small.jpgGas cooktops are the preferred choice of many home chefs who have experience in the kitchen because of their superior Dual fuel range cookers temperature control. They also allow them to use advanced cooking techniques such as charring. These cooktops can be costly though, especially in the event that you require an additional gas hook-up as well as an electrician to install it.

What is a 13amp plug?

If you have a dual fuel range cookers for sale fuel range cooker (also known as a gas and electric oven), then you'll need an appropriately rated 13 amp plug. The plug will also have to be wired in the cooker ring circuit by a fully certified electrician.

This ensures that the flow of current through the plug does not exceed the safe limit, which could lead to an electrical fire. The current is controlled by a fuse within the plug. The fuse goes out as soon as the current passes through it beyond its capacity, which safeguards the appliance from an overload of electricity.

The fuse is listed at 13 amps as indicated on the top of the plug and this is the maximum amount of current that the plug can pass without causing harm to the appliance or overheating the socket. When replacing fuses, it is crucial to use the same amperage rating that was used in the original. If you replace the fuse using one with an alternative rating, you are at risk of overheating the socket, and potentially placing yourself and others at serious risk.

Ceramic 13 amp fuses are extremely robust and can withstand the high temperatures generated by an oven. Ceramic elements are also resistant to fire and is therefore a better option than other types.

There are a variety of ways to install a 13 amp plug. It can be connected to an existing live socket and the flex is then connected to this by a screw or plastic jaw type cord clamp. The cord clamp should be tightened after the plug is tightly pushed into place.

Some plugs will have a cardboard wiring diagram over the pins and these should be removed before connecting the wires. It is essential that the wires be cut to the right length, as being too long can result in them becoming crushed when the plug cover is replaced. The earth wire must be the longest to connect it prior to the neutral and line pins.

How do I connect the 13amp plug?

The vast majority of dual fuel Range cookers (emseyi.com) sold in the UK are wired to 13 amp plug sockets and this is crucial since ovens draw a significant amount of current and standard plug sockets are rated at 10 amps.

In general new appliances must include a plug at the point-of-sale. This is in order to be in compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances might not be connected to the plug, and this is where the issue arises.

The first thing to do when connecting a cooker to an existing plug socket is to ensure that the fuse rating in the fuse box is in line with the rating of the plug. This is crucial since a faulty sized fuse could be dangerous.

It is also recommended to ensure that the fuse is fully set within the cartridge and that there isn't any movement within it. The next step is to prepare the flex to be used. Remove the sheathing to reveal the three conductors that are insulated. Use a utility blade to nick the sheathing just beyond the cord grip at the point of entry into the plug. This will not penetrate the insulated conductors. The nick should be wide enough that the sheathing can split and expand the nick when it is pulled back, revealing the cable underneath. Cut off the excess sheathing, leaving about 40mm beyond the flex.

The flex is positioned over the plug and the earth terminal is placed at the top and the neutral and live terminals at the bottom. The sheathing of each pin is removed using conductors in the colour of the wire as a guide. The internal cable is then secured to the terminal by with the help of the cord grip. If the plug has an attached cord clamp that is screw-type, loosen it and then pull the insulation back to expose the copper wires. Finally, connect each insulated conductor to the proper terminal (starting with the earth before neutral, and then the live) by using the channel that they run through the plug.

What is the maximum draw of a 13amp plug?

The maximum current draw of the 13amp plug is 3kw at 230 volts. This is a significant amount of power, however the standard fuse fitted in the UK plugtop will not fail until the cable has heated to a risky temperature. It is essential to be aware of the amount of electricity you use in your kitchen, since a faulty plug or socket can lead to a fire.

The fuses in plugtops are ceramic, around 25mm long and rated 240V mains. The fuses will bear a BS Kitemark or similar mark on the side and they'll contain sand. There are cheaper glass or plastic alternatives, however they should not be used with a live plug or else you could blow the fuse and potentially get electrocuted!

The majority of dual fuel range cookers in the UK require a hard-wired connection and cannot be plugged directly into an outlet on the wall. They are typically connected through a separate cooker circuit which is only suitable for appliances with a maximum of 20 amps.

Check the ring circuit of your home by using the fuse box, or ask an electrician in your area. They will be able to inform you if the sockets within your home are connected to the same ring or separate and if there is a dedicated circuit for your oven.

The size of your kitchen is one of the main factors when you decide to purchase a dual fuel range cooker. We have a wide selection of cookers to suit any space, from compact 50-60 cm dual fuel models as well as huge 90cm + double oven options from top brands like Rangemaster and StovesAreUs.

We also have a wide selection of multi-function gas and electric cookers. These multifunction cookers let you cook a variety of meals including casseroles, pasta, and curries.

Explore our full range of Cookers in Currys online or head in-store to take a look. We offer free home installation and delivery on selected range cookers and flexible payments options. Our team is on hand to answer any questions you have. Contact us by email or telephone. Credit is subjected to status, and terms and condition apply.

What is the maximum current draw of a cooker switch?

There is a lot confusion regarding the maximum current draw of the cooker switch. The reality is that the majority of cookers are not designed to plug into a standard socket, but rather are hard wired and connected to a specific oven ring circuit. This is because they typically consume more than 20 amps of power when the gas and electric ovens are used.

You will not find dual fuel range cookers that can be fitted in standard sockets, as this would pose an enormous fire risk and would violate electrical regulations. A licensed electrician will install any new electrical wiring to a cooker in the kitchen, and they will ensure that the load (both the oven and hob) do not exceed the supply capability of that circuit.

Dual fuel range cookers mix the responsiveness of a gas stove and the precision and precision of an electric oven. This is why they are popular among chefs and home cooks alike. If you are looking to experiment with different cooking techniques, such as searing and grilling, a dual-fuel range cooker is the perfect option.

When buying a new range cooker you will need to consider several factors like size, function and cost. It is also necessary to have gas connections in your home to connect the appliance. If you're unsure, it's best to get an Gas Safe engineer inspect your property prior to installation.

The Currys range of dual fuel range cookers has options to fit a variety of budgets, from affordable models from Indesit and Zanussi to our exclusive Essentials collection. If you're looking for something a little more advanced We also have a variety of top JennAir ranges, featuring a number of innovative features.

It is essential to read the owner's guide before purchasing a dual-fuel range cooker. This will provide specific information about the gas and electrical requirements. You will need to ensure that your home has a gas hook-up that is suitable, and you may need to get a plumber to install it for you if it is required. Depending on your home you'll also need to make sure that you have a dedicated cooker ring circuit that is installed and endorsed by a licensed electrician.

  • Share

Reviews